Basic Parameters

• Operating Temperature: -15℃ ~ 60℃
• Ambient Humidity: 10% ~ 95% R.H
• Operating Voltage: DC 24V
• Operating Current: 0.15A‑0.47A
• Rated Power: 2W‑10W
• Power‑off Data Retention: 6 years
• Dimensions: 360mm×260mm×6mm (Panel); 350mm×250mm×60.5mm (Back Box)
• Memory Capacity: 64Mb
• Input Sink Current: 7mA
• Input Isolation Voltage: 1.5KV
• Input Sampling Period: 1‑4000mS
• Anti‑jitter Filter Coefficient: 1‑4096
• Output Contact Rating: 1A@36V
• Output Contact Resistance: 0.2Ω@0.5A
• Output Contact Rating: 10A@220V, COS＞0.8
• Output Contact Resistance: 0.2Ω@0.5A
• Speed‑Regulating Voltage Range: 30V‑220V
• Speed‑Regulating Current: ≤2A @ COS＞0.6
• Speed‑Regulating Levels: 100
• Voltage Measurement Resolution: 0.1V
• Voltage Measurement Accuracy: 1V
• Current Input: 4‑20mA
• Voltage Input: 1‑10V
• Resolution: 1/4000
• Temperature Resolution: 0.1℃
• Temperature Accuracy: 1℃
• Temperature Repeatability: 0.5℃
• Temperature Range: -40℃ ~ 80℃
• Temperature Response Time: 6 seconds
• Humidity Resolution: 0.1%RH
• Humidity Accuracy: 3%RH
• Humidity Repeatability: 1%RH
• Humidity Response Time: 2 seconds
• RS485 Baud Rate: 2400 – 115200bps
• Frame Format: 8,N,1
• Network Rate: 10/100M auto‑adaptive
• Communication Mode: TCP/IP, UDP/IP
• Communication Distance: ≤100 meters
• Weight: 4kg

Features

• Full‑digital 10/100M network transmission with unlimited node count, enabling convenient construction of large‑scale systems.
• Encrypted communication via private UDP/IP and TCP/IP protocols to enhance network security.
• High‑speed 32‑bit ARM processor with on‑chip 256K program memory and 32K retained data memory. All operations run on internal chip bus for higher reliability than traditional external systems.
• On‑board 64M large‑capacity memory supports complex linkage rule lists and up to 10,000 event logs. It realizes offline data resume transmission, stores system controller configurations, and supports system backup & restoration.
• 4+16 digital input channels, 20 digital output channels.
• 2‑channel 12‑bit high‑precision analog inputs for 4‑20mA or 0‑10V signals.
• 2 RS485 communication interfaces for connecting smart peripherals such as temperature‑humidity sensors and infrared controllers.
• 7 high‑power control loops with 12A contact rating for TV, lighting and other equipment.
• 1 high‑power 50A control loop for air‑conditioner control.
• 3 ×100W dimming / speed‑regulating channels for dimmable lamps or fans.
• 4 low‑voltage control loops of 5A@24V for alarm linkage, water valve and electric lock control.
• Equipped with manual operation panel for independent control of all high‑power loops and fan speed adjustment.
• Wide‑temperature clock with accuracy of 15ppm, supporting NTP network time synchronization.
• Fully configurable event‑triggered programming. Each event can assign output actions and specify network devices for data upload or linkage.
• Fully programmable timing control, capable of automatic standalone operation without backend host.
• Full‑dot‑matrix graphic LCD display, real‑time showing temperature & humidity, all DI/DO status, power loop status, fan gear, communication status, IP address and other key information.
• Wide‑range power input module accepts 18‑30V DC input.
• Industrial‑grade solid‑state components for wide temperature range, ensuring long‑term uninterrupted stable operation.
• Supports online network firmware upgrade.

Application

Mainly deployed for energy‑equipment management in detention cells, interrogation rooms and interview rooms. It manages lights, televisions, fans, air‑conditioners and collects environmental parameters for detention facilities.